Reach Bee 8 User Manual page 75

REACHBee 8 CL360
User Manual
2.
Open the Basic Information page, and enter a self-defined name of the user group in
User Group and the description about the user group in Description.
3.
Click Operate Auth to enter the operation authorization page as shown in Figure 9-29.
In this page, you can perform operations over unit modules in the back-end page of
the media center (lite).
4.
Tick off the corresponding authorization as needed.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 9-28
Figure 9-29
70