REACHBee 8 CL360
User Manual
Click the corresponding status icon to start, pause, or stop a recording task.
When no video is being recorded, click
displayed as
When a video is being recorded, click
When a video is being recorded, click
displayed as
5.4 Operation Area
Click
in Operations as shown in Figure 5-2 to close the operation area .
5.4.1 Camera Management
Figure 5-8 shows the Camera tab for camera management.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 5-6
to start recording, and the Room0 status is
.
to stop recording.
to pause recording, and the Room0 status is
.
Figure 5-7
31