Video Encoding; Audio Setting - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual
2.
Choose the respective signal standard for Input 1 and Input 2 according to the
interface connection type.
3.
Choose the number of channels for signal capturing in Capture as needed.
4.
Choose the picture layout mode in Video Layout as needed.
5.
Click Save and a dialog box prompts indicating that the setting has been saved.
6.
Click Confirm to complete the configuration.
To switch to the full screen, click Switch.

3.3.2 Video Encoding

Click Video Encoding to open the parameter setting page, as shown in Figure 3-11.
Select the bit rate according to the actual bandwidth.
1.
Select a value in Bit rate.
2.
Select a value in Resolution.
3.
Click Save to complete the configuration.

Audio Setting

3.3.3
Click Audio Encoding to open the parameter setting page, as shown in Figure 3-12.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-10
Figure 3-11
13