Streams - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual
After Bee 8 establishes the connection with an audio input device, the audio input device
can work properly only after LINE IN or MIC IN is ticked off in the Web interface according
to the interface connection type at the rear panel of Bee 8.
Note: To ensure the recording quality, do not tick off the interface having no input signals.
1.
Tick off LINE IN or/and MIC IN according to the interface connection type.
2.
Click Save to complete the configuration.

3.3.4 Streams

Click Streams to open the parameter setting page, as shown in Figure 3-13.
Status specifies the file-receiving status of a third-party video player. The value can be
Active, Stop, and Delete (indicating that the playing address is deleted).
Deleting a playing address
1.
Click the drop-down list in Status and select Delete.
2.
Click Setting and a dialog box is prompted, as shown in Figure 3-14.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-12
Figure 3-13
14