Video Setting - Reach Bee 8 User Manual

REACHBee 8 CL360
User Manual

Video Setting

3.3.1
Video settings consist of four parts: Video Output, Video Input, Video Layout, and Full
Screen.
Video Output
Output Resolution specifies the resolution of video signals output from the VGA video
output interface.
Video Input
After Bee 8 is connected to input video signals from a certain interface, you need to
determine the signal format by choosing HD or SD in the Web interface. For example,
if DVI IN 1 on the rear panel is connected to input SD signals and DVI IN 2 is connected to
input HD signals, ensure that the corresponding signal standards (SD or HD) need to be
selected in Video Input.
Capture
Capture indicates whether to output video images. If ticked off, the corresponding video
images will be output; if not, no video image will be output.
Video Layout
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-7
11