REACHBee 8 CL360
User Manual
2.
Choose Enable in Permission setting as needed.
3.
Click Confirm and a dialog box is prompted, as shown in Figure 3-19.
4.
Click Confirm.
5.
Click Refresh and you will find that the value of Permission Setting changes
from Disable to Enable.
3.3.5 Camera Control
Uploading a camera control protocol
Click Camera Control to open the parameter setting page, as shown in Figure 3-20.
All Rights Reserved © SZ REACH TECH CO., LTD.
Figure 3-18
Figure 3-19
17