Parameter Setting; Input Setting - Reach Bee7 User Manual

REACH Bee7
l
User Manual
3.2

Parameter Setting

Click Settings to display the parameter setting page. By default, the AV Setting tab is
displayed as shown in Figure 3-3. The Settings page consists of three tabs, namely,
Input Setting, Camera Control, and Title/Logo.

3.2.1 Input Setting

Input settings consist of three parts: Video input, Audio input, and Signal model.
Video input:
After Bee 7 is connected to input signals, you need to select the number of video
channels in the Web page. For example, when Bee 7 is configured to input
dual-channel signals from DVI IN 1 and DVI IN 3 interfaces, you need to select Two
channels (DVI In 1, DVI IN 3) to display video normally.
Select the number of channels as needed in Video Input, as shown in Figure 3-4.
1.
Click Save and a dialog box "Save success!" is prompted.
2.
Click OK to complete the setting.
3.
F i gu r e 3 - 3
All Rights Reserved © SZ REACH TECH CO., LTD. 12