Advertisement
Turn on Power and Install Management Host Software
1. Power on the array and configure controller IP addresses per the detailed information in the Installation
Guide. Note: IP addresses are auto-configured via DHCP by default, but can be changed manually using
each controller's serial port (see
2. Download Sun Storage Common Array Manager software and install on the management host, as
described in the Sun Storage Common Array Manager Quick Start Guide.
Documentation for This Product
Additional documentation for the Sun Storage 6180 array is available at:
■
http://download.oracle.com/docs/cd/E19373-01/index.html
Documentation for the Sun Storage Common Array Manager software is available at:
■
http://www.oracle.com/technetwork/documentation/disk-device-194280.html
Review safety information
Review known issues and workarounds
Prepare the site
Install the cabinet
Install the rails for each tray
Install the power distribution units
Install the array
Install the management software
Oracle Contact Information
Documentation
Support
Training
Copyright © 2009, 2011, Oracle and/or its affiliates. All rights reserved.
Copyright © 2009, 2011, Oracle et/ou ses affiliés. Tous droits réservés.
Part No.: E21495-01,
Mfg No.: 7012703
June 2011
).
FIGURE 5
Important Safety Information for Sun Hardware Systems
Sun Storage 6180 Safety and Compliance Manual
Sun Storage 6180 Array Release Notes
Sun Storage 6180 Array Site Preparation Guide
S
un Rack II User's Guide
Sun Storage Modular Rail Kit Installation Guide
Sun Cabinet Power Distribution Unit (PDU) Installation Guide
Sun Storage 6180 Array Hardware Installation Guide
Sun Storage Common Array Manager Installation Guide
http://www.oracle.com/technetwork/indexes/documentation/index.html
https://support.oracle.com
https://education.oracle.com
6
Advertisement
