Checking The Remaining Amount Of Toner And Paper - Utax CD 1242 Instruction Handbook Manual

Checking the Remaining Amount of Toner and Paper

Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
Status
Toner Information
Paper
Toner Status Size
Black (K) Ledger Plain
100%
Ledger Plain
Waste Toner OK
Letter Plain
Letter Plain
Letter Plain
Printing Jobs Sending Jobs Storing Jobs
Status
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner as one of 11 levels from 100 to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source.The remaining
amount of paper is shown by 11 levels from 100 to 0%, however, the paper in the multi purpose tray is shown
by 2 levels as 100% and 0%.
Others
You can check the status of staples and punch waste box.
NOTE:
If the optional built-in finisher, document finisher, or 3,000 sheet document finisher and punch unit are
installed, the Others section provides the status of the punch waste box and whether or not staples are
available.
OPERATION GUIDE
Others
Type Status Type Status
30% Staple A OK
30%
30%
30%
0%
Device/
Paper/Supplies
Communication
08/08/2009 10:10
1
Press the Status/Job Cancel key.
2
Press [Paper/Supplies].Check the remaining
amount of toner and the status of a waste toner box
in Toner Information, and the remaining amount of
paper in each paper source in Paper
Status / Job Cancel
7
7-15