Adjustment/Maintenance - Utax CD 1242 Instruction Handbook Manual

Default Setting (System Menu)

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
• Copy Density Adjustment ...8-42
• Send/Box Density Adjust ...8-42
• Print Density ...8-43
• Drum Refresh ...8-43
• Correcting Fine Black Lines ...8-44
• System Initialization ...8-44
• Display Brightness ...8-44
• Silent Mode ...8-45
• Charger Auto Cleaning ...8-45
• Auto Color Correction...8-45
• Gray Adjustment...8-46
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of Copy Density Adjustment.
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
Send/Box Density Adjust
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels
both in auto and manual density modes.
Use the procedure below to adjust the density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Next] of Send/Box Density Adjust..
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
8-42 OPERATION GUIDE