Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter
a login user name and password, and press [Login]. Refer to Adding a User on page 11-5 for the default login
user name and password.
Be sure to set the time difference before setting the date and time.
If you change Date/Time setting, trial functions will be unavailable. For details, refer to Optional Functions on
page 8-75.
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
Time Zone
-12:00 International Date Line West
-11:00 Midway Island, Samoa
-10:00 Hawaii
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
-07:00 Arizona
Status
Date/Timer - Date/Time
Set the date and time.
2008
10
Y ar
M
10
10
Status
OPERATION GUIDE
ummer Time
1/13
Off
On
Cancel
OK
08/08/2009
10:10
10
th
Day
31
S
nd
Cancel
OK
08/08/2009
10:10
1
Press the System Menu key.
2
Press [
], [Date/Timer] and then [Change] of
Time Zone.
3
Select the region.
NOTE:
Press [
] or [
4
Press [Off] or [On] of Summer Time and press [OK].
NOTE:
If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
5
Press [Change] of Date/Time.
6
Set the date and time. Press [+] or [–] in each
setting.
7
Press [OK].
Preparation before Use
] to view the next region.
2-11
2