Print Density; Drum Refresh - Utax CD 1242 Instruction Handbook Manual

Print Density

Adjust print density. Adjustment can be made in 5 levels.
Use the procedure below to adjust the print density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Change] of Print Density.
3
Press [1] - [5] (Lighter-Darker) to adjust density.
4
Press [OK].

Drum Refresh

Refresh the drum when image blur or white spots appear on images in copies.
NOTE:
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
To use [Drum Refresh], load Ledger or A3 size paper into the Multi Purpose tray.
Use the procedure below to refresh the drum.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance].
3
Press [Next] of Drum Refresh.
4
Press [Execute] to perform Drum Refresh.
5
After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.
OPERATION GUIDE
Default Setting (System Menu)
8
8-43