Utax CD 1242 Instruction Handbook Manual page 59

OPERATION GUIDE
1
Open the multi purpose tray.
2
Adjust the paper width guides to the width of the
paper.
3
Insert the paper along the paper width guides into
the tray until it stops.
IMPORTANT: Keep the side that was closest the
package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check
that there is no paper left over in the tray from a previous
job before loading the paper. If there is just a small
amount of paper left over in the multi purpose tray and
you want to add more, first remove the left-over paper
from the tray and include it with the new paper before
loading the paper back into the tray.
Preparation before Use
2-23
2