Clearing Staple Jams
OPERATION GUIDE
6
Insert the staple holder into the slot of the staple
unit again. When fully inserted, the staple holder
locks with a clicking sound.
1
Pull out the staple holder referring to steps 1 and 2
of Adding Staples.
2
Holding the knob A on the face plate of the staple
holder, lift the face plate.
A
3
Clear the staple jammed in the cartridge end
(staple-loaded side).
4
Lower the face plate of the staple holder.
5
Insert the face plate back in place. When fully
inserted, the face plate locks with a clicking sound.
Appendix-7