Utax CD 1242 Instruction Handbook Manual page 84

Basic Operation
With Document Finisher
3
2
1
Original
Ready to copy.
Collate/Offset
Collate
Place original.
Offset
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Ready to copy.
Collate/Offset
Collate
Place original.
Offset
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
3-14
3
2
3
1
2
3
1
2
1
Copy (each set)
Copies
Off On
Off Each Set
Cancel OK
08/08/2009 10:10
Copies
Off On
Off Each Page
Cancel OK
08/08/2009 10:10
When you use offsetting, printed copies are segregated
after each set of copies (or after each page).
NOTE:
The optional document finisher or 3,000 sheet
document finisher is required.
The procedure for using collate/offset copying is
explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Collate/
Offset].
4
To use collate copying, press [On] of Collate.
To use offset copying, press [Each Set] of Offset.
Press [OK].
If [Off] is selected for Collate, press [Off] or [Each
Page] of Offset.
5
Press [OK].
6
Press the Start key. Copying begins.
OPERATION GUIDE