Time Zone; Auto Panel Reset - Utax CD 1242 Instruction Handbook Manual

Default Setting (System Menu)

Time Zone

Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Time Zone.
3
Select the location.
NOTE:
Press [ ] or [
4
Press [Off] or [On] of Summer Time and press [OK].
NOTE:
If you select a region that does not utilize summer time, the summer time setting screen will not appear.

Auto Panel Reset

If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE:
Refer to page 8-15 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Auto Panel Reset.
3
Press [Off] or [On].
4
Press [OK].
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are
between 5 and 495 seconds (every five seconds).
NOTE:
If you select [Off] for Auto Panel Reset, the time display does not appear.
Use the procedure below to set the reset time.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer.
8-48
] to select the location.
OPERATION GUIDE