Utax CD 1242 Instruction Handbook Manual page 298

Default Setting (System Menu)
5
Press [OK].
6
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-14 about the procedures.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Scan.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Print.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
8-68 OPERATION GUIDE