Utax CD 1242 Instruction Handbook Manual page 246

Default Setting (System Menu)
Continuous Scan
Set the continuous scan defaults. The available default settings are shown below.
Item
Off
On
Refer to page 4-10 for Original Orientation.
Use the procedure below to select the default settings for continuous scanning.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
Use the procedure below to select the default quality setting for originals.
4
Press [OK].
Original Image
Set the default original document type. The available default settings are shown below.
Item
Text+Photo
Photo
Text
for OCR
Printed Document
* This function is only available for black and white mode.
Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default original image.
4
Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
8-16
Continuous scan not performed
Continuous scan performed
], [Next] of Function Defaults and then [Change] of Continuous Scan.
Text and photos together.
For photos taken with a camera.
Only text, no photos.
Image quality suitable for OCR software.*
For documents printed from this machine.
], [Next] of Function Defaults and then [Change] of Original Image.
Description
Description
OPERATION GUIDE