Utax CD 1242 Instruction Handbook Manual page 80

Basic Operation
XY Zoom
The procedure for using zoom copying is explained below.
Ready to copy.
Zoom
Standard
Zoom
XY Zoom
Place original.
Original : ---
:
Zoom
400%
Paper : ---
Preview
Add Shortcut
Status
Ready to copy.
Zoom
Standard
Z m
XY Zoom
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
3-10
Y
X
Copies
(25 - 400)
400 %
Legal
Max.
400% 78%
>>Letter
STMT
Ledger
200% 77%
# Keys
>>Ledger >>Legal
STMT 100% Ledger
64%
154%
>>Legal >>Letter
Letter Auto Ledger
129% 50%
>>Ledger >>STMT
Legal
Min.
121% 25%
>>Ledger
Cancel OK
08/08/2009
Copies
(25 - 400)
X
100
%
# Keys
(25 - 400)
Y
100
%
Top Edge Top
Original
Orientation
# Keys
Cancel
OK
08/08/2009
Select vertical and horizontal magnifications
individually. Reduce or enlarge original images in 1%
increments between 25% and 400%.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4
Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed
magnification as desired. You can also enter the
magnification directly using the numeric keys by
pressing [# Keys].
When using Preset Zoom, select the key of desired
magnification.
When using XY Zoom, press [XY Zoom].
10:10
Press [+] or [–] to change the displayed
magnifications of X (horizontal) and Y (vertical).
You can also enter the magnification directly using
the numeric keys by pressing [# Keys].
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
10:10
5
Press [OK].
6
Press the Start key. Copying begins.
OPERATION GUIDE