Configuring Cluster Disks - LSI MegaRAID SCSI 320-2 RAID Controller Series 518 Hardware Manual

7.4.15 Configuring Cluster Disks
7-18
14. Click on Next.
The Add or Remove Managed Disks screen displays next. This
screen is in the following section about configuring cluster disks.
Windows 2000 Managed Disks displays all SCSI disks, as shown on the
screen below. It displays SCSI disks that do not reside on the same bus
as the system disk. Because of this, a node that has multiple SCSI buses
will list SCSI disks that are not to be used as shared storage. You must
remove any SCSI disks that are internal to the node and not to be shared
storage.
Installing and Configuring Clusters
Copyright © 2002 by LSI Logic Corporation. All rights reserved.