Table of Contents
Advertisement
7-22
In this example, both networks are configured so that both can be
used for internal cluster communication. The next dialog window
offers an option to modify the order in which the networks are used.
Because Private Cluster Connection represents a direct connection
between nodes, it remains at the top of the list.
In normal operation, this connection is used for cluster
communication. In case of the Private Cluster Connection failure,
Cluster Service automatically switches to the next network on the
list—in this case Public Cluster Connection.
8. Verify that the first connection in the list is the Private Cluster
Connection, then click on Next.
Note:
Always set the order of the connections so that the Private
Cluster Connection is first in the list.
Installing and Configuring Clusters
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
