Step 9: Connect Scsi Devices - LSI MegaRAID SCSI 320-2 RAID Controller Series 518 Hardware Manual

6.2.9

Step 9: Connect SCSI Devices

Figure 6.8 Installing the MegaRAID SCSI 320-2 Controller
Bracket Screw
Use SCSI cables to connect SCSI devices to the MegaRAID SCSI 320-1.
The MegaRAID SCSI 320-2 has the following connectors:
Two internal high-density 68-pin SCSI connectors: J7 is for SCSI
channel 0, J8 is for SCSI channel 1.
Two external very high-density 68-pin SCSI connector: J9 is for SCSI
channel 0, J19 is for SCSI channel 1.
Installation Steps
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
32-bit slots
(3.3 V)
64-bit slots
(5 V)
6-17