LSI MegaRAID SCSI 320-2 RAID Controller Series 518 Hardware Manual page 5

Audience
Organization
Preface
This book is the primary reference and Hardware Guide for the LSI Logic
®
MegaRAID SCSI 320-2 Controller. It contains instructions for installing
the MegaRAID controller and for configuring RAID arrays. It also contains
background information on RAID.
The MegaRAID SCSI 320-2 controller supports single-ended and low-
voltage differential (LVD) SCSI devices on two Ultra320 and Wide SCSI
channels with data transfer rates up to 320 Mbytes/s.
This document is intended for people who need to install the MegaRAID
SCSI 320-2 Controller in a server and then create and configure RAID
arrays.
This document has the following chapters and appendixes:
Chapter 1, Overview, provides an overview of the MegaRAID SCSI
320-2 and basic SCSI features.
Chapter 2, Introduction to
concepts.
Chapter 3, RAID
the factors to consider when choosing a RAID level.
Chapter 4, Features, explains the features of the MegaRAID SCSI
320-2.
Chapter 5, Configuring Physical Drives, Arrays, and Logical
Drives, explains how to configure SCSI physical drives, arrays, and
logical drives.
MegaRAID SCSI 320-2 Hardware Guide
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
RAID, introduces important RAID
Levels, describes each supported RAID level and
v