LSI MegaRAID SCSI 320-2 RAID Controller Series 518 Hardware Manual page 153

Numerics
0 DIMM socket 6-4
160M and Wide SCSI 4-1
68-pin connector pinout for LVD SCSI
68-Pin High Density Connectors
A
AMI Part Number
Battery 6-13
AMPLIMITE .050 Series connectors
Array C-1
Array Configuration Planner
Array management software
Array performance features
Array spanning C-1
Assigning Drive Letters 7-15
Assigning RAID levels 5-12
Asynchronous operations C-1
Audible Warnings B-1
Automatic failed drive detection and rebuild
B
Battery Pack 6-13
BIOS Boot Error Messages
BIOS Configuration Utility 6-20
BIOS message 6-20
Bus Data Transfer Rate 4-7
Bus Type 4-7
Bus-based 2-11
C
Cable assembly for internal Wide SCSI devices
Cables To Go A-6
Cache Configuration 4-7
Cache I/O C-1
Cache Memory 4-9
Installing 6-4
Card Size 4-7
Changing DRAM Modules 6-15
Changing the Battery Pack 6-15
Channel C-2
Charging the Battery Pack 6-15
Cluster Configuration Wizard
Cluster Disks
Configuration 7-18
Cluster Installation 7-5
Overview 7-5
Index
A-9
A-1
A-8
5-15
C-1
4-5
4-6
8-3
A-2
7-16
MegaRAID SCSI 320-2 Hardware Guide
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Validation 7-25
Cluster Node Network Adapter
Configuration 7-8
Cluster Service
Assigning Drive Letters 7-15
Cluster Node Network Adapter
Cluster User Account 7-12
Configuring Cluster Disks
Connectivity and Name Resolution
Disk Access and Functionality
Domain Membership 7-12
SCSI Drive Installations
Setting Up Networks 7-7
Shared Disks Configuration
Shared Disks Setup 7-13
Software Installation 7-16
Validating the Cluster Installation
Cluster User Account
Setup 7-12
Clustering
Network Requirements 7-4
Shared Disk Requirements
Cold swap C-2
Compatibility 4-12
Components 4-8
Configuration on Disk 4-3
Configuration Strategies 5-10
Configuring Arrays 5-9
Configuring Logical Drives 5-13
Configuring SCSI Physical Drives
Distributing Drives 5-1
Configuring SCSI physical drives
Connecting internal and external Wide devices
,
Consistency check 2-4 C-2
Converting from internal Wide to internal non-Wide (Type 3)
Converting internal Wide to internal non-Wide
Converting internal Wide to internal non-Wide (Type 30)
CPU 4-8
Creating hot spares 5-10
Creating logical drives 5-10
D
Data redundancy
Using mirroring 2-6
Data transfer capacity C-2
Dedicated parity 2-8
,
Degraded 2-10 C-2
Devices per SCSI Channel 4-8
DIMM socket 6-4
DIMMs 6-4
7-8
7-18
7-11
7-15
7-27
7-14
7-25
7-5
5-1
A-3
A-4
A-5
A-5
IX-1