Checking The Hub Time; Restoring Hub Configuration And Connections; Restoring Configuration And Connections - AMX endeleo UDM 1604 User Manual

Chapter 1
Hub configuration
Figure 1-4: Hub Time and Date configuration
(3)
1.3.3

Checking the Hub Time

Clicking on the date and time on the screen simply refreshes the clock to
the current time. This can be useful before creating a scheduled event.
1.4

Restoring Hub configuration and connections

To ensure the configuration settings for the Hub are retained each time
the hub boots it is advisable to ensure the following options have been
enabled.
1.4.1

Restoring configuration and connections

To ensure network configuration and port configuration are restored on
boot up select the Restore configuration on power up.
(1)
(2)
Figure 1-6: Restoring configuration on power up
Click on Update when all configuration changes have
been completed.
Figure 1-5: Hub Date and Time
Warning!
Failure to select the Restore Configuration and
Connection options will mean if the Hub is reset the
Hub configuration and connections will need to be
reconfigured.
Select the Setup option from the options available.
Ensure the checkbox beside Restore configuration
on power up has been selected.
UDM1604-USG – 2.0 - 0606 1-3