AMX UDM-0102 Quick Start Manual

Overview
The UDM-0102 1x2 Multi-Format Distribution Hub (FG-UDM-0102) is designed for
small installations with long video/audio cable runs (FIG. 1).
ETHERNET port (RJ-45)
Serial port (RJ-12)
Power LED
Active input (A/B) LED
Preset buttons (1/2)
RJ-45 port for connection to an UDM-RX01/02 Receiver
SPDIF female
Digital Audio
RCA Audio
connector (A)
Left and Right (A)
VIDEO IN A (HD15) VIDEO IN B (HD15)
FIG. 1
UDM-0102 Hub - Front and Rear panel components
Compatibility
The UDM-0102 is compatible for use with the UDM-RX02 (FG-UDM-RX02) receiver.

Product Specifications

UDM-0102 Specifications
Power Requirements: 24VDC @ 1.25A
Front Panel Components
Ethernet (RJ-45) port: Provides 10 BaseT network connectivity
Serial (RJ-12) port Enables an administrator to control the various functions
(labelled "10101"): to the UDM-0102 from a command line prompt and
terminal connection. Requires a DB9-to-RJ12 adapter
cable (FG-RS01) to connect to a PC.
LEDs: The front LEDs are grouped by control type and are
labeled according to their corresponding port (connector)
numbers on the rear of the unit.
• Power - device is receiving power
• A - Source A is currently selected
• B - Source B is currently selected
• Status - changes from red to green when it receives a
valid UDP command, and returns to red after 30
seconds if it has not received anything.
SELECT (A/B) Pushbutton switches between Source A / Source B.
Pushbutton:
PRESETS (1/2) Two pushbuttons execute user-defined presets.
Pushbuttons:
UDM (RJ-45) port: Provides audio/video transport as well as control via
Cat5/5e/6 to a UDM-RX02 Receiver.
Rear Panel Connectors:
Source Inputs (A, B): Two sets of input connectors for A/V source devices
(labelled A and B):
• VIDEO IN: HD-15 input connector (female) - supports
VGA, Component, S-Video and Composite formats.
• Analog Audio: Left (white) and Right (red) stereo RCA
input connectors (female).
• Digital Audio: SPDIF (female) input connector.
IRTX Ports: Two 3.5mm stereo IR Transmitter output ports allow up to
two IR-controlled devices (such as a DVD or VCR player)
to be controlled via optional wired IR emitters.
IRRX Port: 3.5mm stereo input port, allows connecting an IR receiver
to allow learning IR commands.
Power Socket: 2.1mm barrel-style DC power socket (female)
Status LED
Source
Select
button
RCA Audio
IRTX ports 1/2
Left and Right (B)
SPDIF female
IRRX port
Digital Audio
Power connector
connector (B)
UDM-0102
1x2 Multi-Format Distribution Hub
UDM-0102 Specifications (Cont.)
Operating Environment: • 35°F - 95°F (5°C - 35°C)
Dimensions (HWD):
(front)
Weight:
Certifications:
Included Accessories:
Other AMX Equipment:
(rear)
Audio & Video Formats/Resolutions/Distance
Audio & Video Formats/Resolutions/Distance
Class Format
Composite 720x480
720x756
Component 720x480
720x756
1280x720
1920x1080
1920x1080
VGA 640x480
800x600
1024x768
1280x1024
1600x1200
A/V Source Input Connectors
There are 2 sets of input connectors to the rear panel of the UDM-0102, labelled A and
B (see FIG. 1) that allow the UDM-0102 to connect to A/V source devices.

Connecting a VGA Video Input

1. Connect one end of a VGA cable to the source device's VGA output port.
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM. For example, connect to the Video In connection on Input
A of the Hub.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
Note: Ensure Input A is configured as a "VGA Input" and named appropriately within
the "Inputs" section of the Configuration software. Also ensure the correct Audio Type
(Analog L/R or S/PDIF) is selected for the relevant input.

Connecting a Composite Video Input

1. Connect the UDM-HD15RCA3F Breakout Cable to the source device's
Composite output ports: A1 = red, A2 = green, A3 = blue.
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.

Connecting a Component Video Input

1. Connect the UDM-HD15RCA3F Breakout Cable to the video source device's
Component video output connectors (Red, Green and Blue).
2. Attach the other end of the cable to the appropriate VIDEO IN connection
(A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF)
connector.
Quick Start Guide
• Max. relative humidity - 85% (non-condensing)
1.61" x 8.63" x 3.66" (40.89 mm x 219.08 mm x 93.04 mm)
1.60 lb. (730 g)
• CE
• FCC part 15 Class A
• UDM-PS Power Supply with cable - 24VDC, 1.25A
(FG-UDM-PS)
• RS01, RS232 Serial Transmit Cable, DB9-to-RJ12
(FG-RS01)
• Two UDM-HD15RCA3F HD-15 to 3x RCA Breakout
Cables (FG-HD15RCA3F)
• Ethernet Crossover Cable, 3' (0.9144 m)
• UDM-SVID01 HD-15 to S-Video Cable
(FG-UDM-SVID01)
• UDM-RX02 Multi-Format Receiver (FG-UDM-RX02)
• UDM-RC10 Multi-Format IR Engineering Remote
Control (FG-UDM-RC10)
• UDM-RC02 Multi-Format IR Remote Control
(FG-UDM-RC02)
• IR01 IR Emitter Module (FG-IR01)
• IR03 External IR Receiver Module (FG-IR03)
Name Distance (m)
NTSC 700
PAL 700
480p 700
576p 700
720p 200
1080i 150
1080p 120
VGA 200
SVGA 200
XGA 200
SXGA 150
UXGA 120
Distance (ft.)
2300
2300
2300
2300
650
500
400
650
650
650
500
400