Cascaded Inputs; Cascaded Audio; Renaming Output Ports - AMX endeleo UDM 1604 User Manual

2.3

Cascaded Inputs

UDM Hubs can transmit inputs from other UDM Hubs if cascaded
together.
(1)
(2)
2.3.1

Cascaded Audio

UDM Hubs can transmit audio (and video) from other UDM Hubs if
cascaded together. To cascade audio;
(1)
(2)
2.4

Renaming Output Ports

(1)
(2)
2-4
UDM1604-USG – 2.0 - 0606
Input configuration
To display an input from a cascaded Multi Format Video
Hub, click on the checkbox beneath the Cascade
column beside the relevant input.
For example if an Administrator selects Cascade beside
Input A in this Hub, then Input A from the Hub(s)
interconnected (cascaded) above will be displayed
through Input A of this Hub.
Note!
The Endeleo cascade cable (UDM-EXP-01) will be
connected to the relevant UDM hubs to permit input
cascading. Refer to the Advanced Administration
section of this manual to configure a cascaded
system.
Click on the Inputs option.
In the Audio section click on the checkbox beneath
the Cascade column beside the relevant audio for the
correct input (A, B, C or D).
For easier management the system allows the
Administrator to rename any of the Output ports.
Click on the Status option from the left hand side of
the screen. The 16 output ports should now be visible.
Figure 2-4: Output Ports
Section 2