Section 5
Operating the UDM Hub
5.2
Changing an Input
The input being displayed at a port can be changed at any time. Simply
select the new input to be displayed at this port. To change multiple
ports select/include those ports appropriately.
5.3
User Control
Administrators can issue commands from the UDM Browser Interface.
These commands are issued from;
5.3.1
Issuing commands to a Port
Control of the input is performed in a similar way to changing the input
to be displayed. A Control or command can either be issued per Input
or issued across all or groups of ports.
(1)
•
the toolbar located at the bottom of the web
browser to the selected ports;
•
the user control drop down options from the
Status page for the relevant port or
•
the user control section from within a selected
port i.e. once a port's hyperlink has been
clicked the User Control option will be visible.
Tip!
Schedules are also used to issue commands at a pre-
determined time to inputs and devices.
Note;
Ensure the device's Infrared commands have been
learned by the Hub first. Refer to the Protocols and IR
Learning section.
Click on the Status option. Ensure the relevant port is
known.
UDM1604-USG – 2.0 - 0606
5-3