Table of Contents
Advertisement
Configuration - Schedule Page
Checking the Hub Time
Click on the date and time at the top-right of the Status page to refresh the UDM's internal clock to the
current time (FIG. 59). This can be useful before creating a scheduled event.
FIG. 59
Hub Date and Time
Scheduling IR Device Control Events
Use the Schedule options in the Devices page (bottom toolbar) to create a scheduled IR Device Control
Event (FIG. 60):
FIG. 60
Devices page
58
Scheduled Input Controls - Use the Schedule options in the top toolbar of the Status page to
schedule inputs (devices connected to the Input connectors on the rear panel of the UDM) to
be displayed on specific Ports (via the UDM receivers connected to the Output ports on the
front of the UDM) at specified times. For example, you could create a scheduled input event
that causes the device connected to Input A to automatically display on Port 1 every day at
9:00am.
See the Scheduling Inputs section on page 64 for details.
Preset Scheduling - Multiple scheduled events can be combined into a single Preset
Schedule. For example, you could create a Preset Schedule that powers up devices 1-4
(connected to the IRTX Ports on the rear panel), then powers up display devices 1-4
(connected to the RJ-45 Output ports on the front panel), and displays Inputs 1-4 on Ports 1-4.
See the Preset Scheduling section on page 67 for details.
IR Device Control toolbar
UDM-1604C 4x16 Multi-Format Distribution Hub
Advertisement
Table of Contents
