Microsd Card Information And Settings - Sierra Wireless Overdrive Pro 3G User Manual

Default Gateway
software uses when an IP address does not match any other routes in the routing table (that is,
when an IP packet's destination address is outside of the local subnet).
WAN MTU size
network protocol can transmit.
Viewing and Configuring Detailed Internet Connection Information
When you're logged in, the Internet Connection Information window displays a table showing data
use:
●
In the current cycle or since you last reset the data usage figures — whichever occurred more
recently. These numbers get automatically reset to 0 on the day selected in the
●
Over the lifetime of the device.
●
By network [3G and 4G], and by sent, received, and total.
From this window you can:
●
Reset the data usage figures for the current billing cycle. (Click
●
Change the start day of the billing cycle (in the
●
See the number of days left in the cycle.

microSD Card Information and Settings

The text next to the microSD icon (
●
Enabled
●
Detected
●
Accessible by all ("shared") or only the administrator
●
Accessible with or without a password (security)
Click the icon to display the SD Card Information and Settings window. The window displays:
●
The card status (see the list above)
●
Storage capacity of the card, and space available (displayed only if a card is detected)
●
A button to safely eject the card (
When you're logged in, you can:
●
Enable or disable the microSD card slot. (See "Enabling the microSD Card Slot" on page 51.)
●
Set up access to the card. (See "Setting Up Access to the microSD Card" on page 51.)
46 Using Your Device
— This is the address of the node on the computer network that the network
— This is the size of the largest packet ("Maximum Transmission Unit") that a
) indicates whether the card is:
Safe-Eject SD Card
Reset
list).
Starts on day
; displayed only if a card is detected))
Starts on day
.)
list.