Configuring The Pppoe Client; Figure 379 Internet Access Setup (Pptp); Table 228 New Fields In Menu 4 (Pptp) Screen - ZyXEL Communications ZYWALL 35 User Manual

Chapter 37 Internet Access

Figure 379 Internet Access Setup (PPTP)

The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.

Table 228 New Fields in Menu 4 (PPTP) Screen

FIELD
Encapsulation
Idle Timeout

37.4 Configuring the PPPoE Client

If you enable PPPoE in menu 4, you will see the next screen.
632
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to choose PPTP. The encapsulation
method influences your choices for the IP Address field.
This value specifies the time, in seconds, that elapses before the ZyWALL
automatically disconnects from the PPTP server.
ZyWALL 5/35/70 Series User's Guide