Table of Contents
Advertisement
Factory Settings
You can restore the gateway to its factory settings.
To restore factory settings:
Use a paperclip to press and hold the Reset button for at least seven seconds.
The gateway resets and returns to the factory configuration settings shown in the following
table.
Table 3. Gateway factory default settings
Feature
Gateway login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet
WAN MAC address
connection
WAN MTU size
Port speed
Local area
LAN IP
network (LAN)
Subnet mask
DHCP server
DHCP range
Time zone
Time adjusted for daylight saving
time
Wireless
Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
Dual Band Wireless VDSL2 + Ethernet Gateway
Default Behavior
www.routerlogin.net or http://192.168.0.1
admin
password
Use default hardware address.
1492
AutoSensing
192.168.0.1
255.255.255.0
Enabled
192.168.02-192.168.0.254
Greenwich Mean Time (GMT) +10
Disabled
Enabled
Preset. For information, see the product label.
Enabled
Auto
Note:
Standard 802.11 specifications. Actual throughput varies.
Network conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead lower actual data
throughput rate.
Australia
Supplemental Information
122
Maximum wireless signal rate derived from IEEE
Advertisement
Table of Contents
