Control Access to the USB Drive
You can specify the device name, workgroups, and network folders for your USB device.
To specify the USB access settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or www.routerlogin.com.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select Advanced > USB Storage > Advanced Settings.
5.
Specify access to the USB storage device:
•
Network Device Name. This is the name used to access the USB device connected
to the gateway. The default is readyshare.
•
Workgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name is displayed here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
•
Access Method. Select the access methods:
-
Network Neighborhood/MacShare. Enabled by default.
Dual Band Wireless VDSL2 + Ethernet Gateway
Share a USB Drive Attached to the Gateway
56