Table of Contents
Advertisement
Troubleshoot a PPPoE Internet Connection
To troubleshoot a PPPoE Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://192.168.0.1.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Click the Advanced tab.
The Advanced Home screen displays.
5.
On the WAN pane, click the Connection Status button.
For more information, see
information, including valid IP addresses, your PPPoE connection is up and working.
If any of the fields show incomplete information or no valid IP address, you can attempt to
reconnect by clicking the Connect button. The gateway continues to attempt to connect
indefinitely.
If you cannot connect after several minutes, you might be using an incorrect service name,
user name, or password. Your ISP might also be experiencing a provisioning problem.
Note:
Unless you connect manually, the gateway does not authenticate
using PPPoE until data is transmitted to the network.
Troubleshoot Your Network Using the Ping Utility
Most network devices and routers contain a ping utility that sends an echo request packet to
the designated device. The device then responds with an echo reply. You can troubleshoot a
network by using the ping utility on your computer or workstation.
Test the LAN Path to Your Gateway
You can ping the gateway from your computer to verify that the LAN path to your gateway is
set up correctly.
To ping the gateway from a computer running Windows:
1.
From the Windows toolbar, click the Start button and select Run.
Dual Band Wireless VDSL2 + Ethernet Gateway
View WAN Information
Troubleshooting
117
on page 94. If the fields show valid
Advertisement
Table of Contents
