Table of Contents
Advertisement
Problems with Date and Time
The gateway uses the Network Time Protocol (NTP) to obtain the current time from one of
several network time servers on the Internet. Each entry in the log is stamped with the date
and time of day.
To view the gateway's date and time setting:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or www.routerlogin.com.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Security > Schedule.
The Schedule screen displays.
Problems with the date and time function can include the following:
•
Date shown is January 1, 2000.
Cause. The gateway did not yet reach a network time server. Check that your Internet
access is configured correctly. If you just changed the gateway configuration, wait at least
five minutes and check the date and time again.
•
Time is off by one hour.
Cause. The gateway does not automatically detect daylight saving time. In the Schedule
screen, select the Automatically adjust for Daylight Savings Time check box and click
the Apply button.
Dual Band Wireless VDSL2 + Ethernet Gateway
Troubleshooting
120
Advertisement
Table of Contents
