Factory Default Settings - NETGEAR CG3100Dv3 User Manual

Default Settings and Technical
A.
Specifications
This chapter includes:
•

Factory Default Settings

• Technical Specifications
Factory Default Settings
You can return the gateway to its factory settings. On the back panel of the gateway, press
and hold the Restore Factory Settings button
and returns to its factory settings. Your device will return to the factory configuration settings
shown in the following table.
Factory Default Settings
Gateway Login
Local Network
(LAN)
Firewall
Internet
connection
on page 49
User login URL
User name and password (case
sensitive)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
WAN MAC address
WAN MTU size
for over 7 seconds. The gateway resets,
http://192.168.1.1
admin/password
192.168.1.1
255.255.255.0
Enabled
192.168.1.2
192.168.1.254
Disabled (except traffic on port 80, the http port)
Enabled (all)
Disabled
Use default hardware address
1500
48
A