Factory Default Settings - NETGEAR CG3100 User Manual

Factory Default Settings

You can return the gateway to its factory settings. On the bottom of the gateway, press and
hold the Restore Factory Settings button
returns to its factory settings. Your device will return to the factory configuration settings
shown in the following table.
Factory Default Settings
Gateway Login User login URL
User name and password (case
sensitive)
Local Network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
Internet WAN MAC address
connection
WAN MTU size
NETGEAR Wireless Cable Gateway
for over 7 seconds. The gateway resets, and
http://192.168.1.1
admin/password
192.168.1.1
255.255.255.0
Enabled
192.168.1.2
192.168.1.254
Disabled (except traffic on port 80, the http port)
Enabled (all)
Disabled
Use default hardware address
1500
Technical Specifications
50