Table of Contents
Advertisement
Table 3. Gateway factory default settings (continued)
Feature
Wireless
RF channel
(continued)
Operating mode
20/40 MHz coexistence
Data rate
Output power
Technical Specifications
The following table describes the technical specifications for the gateway.
Table 4. Technical specifications
Feature
Data and routing protocols
Power adapter
Dimensions
Weight
Operating temperature
Operating humidity
LAN
WAN
Wireless
Radio data rates
Data encoding standards
Maximum computers per
wireless network
Operating frequency range
802.11 security
Dual Band Wireless VDSL2 + Ethernet Gateway
Default Behavior
Auto
•
•
Enabled
Best
Full
Description
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
240V, 50 Hz, input
12 VDC @ 2.5A output
73.20 x 122.5 x 209.95 mm (2.88 x 4.8 x 8.27 in.)
1.27 kg (2.8 lb)
0° to 40°C (32º to 104ºF)
90% maximum relative humidity, noncondensing
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
entry for Transmission speed in
Auto Rate Sensing
•
IEEE 802.11 b/g/n 2.4 GHz - 256 QAM support
•
IEEE 802.11 a/n/ac 5.0 GHz
Limited by the amount of wireless network traffic generated by each node
(typically 50–70 nodes)
2.412–2.462 GHz
5.15 to 5.35 + 5.47 to 5.60 + 5.65 to 5.85 GHz
WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode
Supplemental Information
123
2.4 GHz is 11n, 300 Mbps
5 GHz is 11ac, 1300 Mbps
Table 3
on page 122.
Advertisement
Table of Contents
