Table of Contents
Advertisement
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a wireless computer or device to your WiFi network without
typing the WiFi password.
To use the WPS Wizard:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or www.routerlogin.com.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select Advanced > WPS Wizard.
A note displays that explains WPS.
5.
Click the Next button.
The WPS screen displays.
6.
Select a setup method:
•
Push button. Click the WPS button on this screen.
•
PIN Number. The screen adjusts. Enter the client security PIN and click the Next
button.
7.
Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The gateway WPS screen displays a confirmation message.
Specify Basic WiFi Settings
The gateway comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the gateway label. The preset SSID and
password are uniquely generated for every device to maximize your wireless security.
You do not need to change the security
note of the new settings and store the note in a safe place where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer with
a wired connection to access the gateway.
Dual Band Wireless VDSL2 + Ethernet Gateway
settings.
Specify Network Settings
76
If you change the security settings, make a
Advertisement
Table of Contents
