Table of Contents
Advertisement
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select Advanced > Advanced Setup > Remote Management.
5.
Select the Turn Remote Management On check box.
6.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the gateway's remote management.
For enhanced security, restrict access to as few external IP addresses as practical.
Select one of the following:
•
Only This Computer. Enter the IP address that will be allowed access.
•
IP Address Range. Enter a beginning IP address and an ending IP address.
•
Everyone. Allows access from any IP address on the Internet.
7.
Specify the port number for accessing the web management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface. Choose
a number from 1024 to 65535, but do not use the number of any common service port.
The default is 8080, which is a common alternate for HTTP.
8.
Click the Apply button.
Your changes are saved.
Dual Band Wireless VDSL2 + Ethernet Gateway
Manage Your Network
107
Advertisement
Table of Contents
