Table of Contents
Advertisement
The table under Outbound Services lists all existing rules for outbound traffic. If you did
not define any rules, only the default rule is listed. The default rule allows all outgoing
traffic.
5.
Select the radio button for the rule.
6.
Click the Delete button.
The rule is deleted.
Set Up Port Forwarding to a Local Server
If your home network includes a server, you can allow certain types of incoming traffic to
reach the server. For example, you might want to make a local web server, FTP server, or
game server visible and available to the Internet.
The gateway can forward incoming traffic with specific protocols to computers on your local
network. You can specify the servers for applications and you can also specify a default DMZ
server to which the gateway forwards all other incoming protocols.
To forward specific incoming protocols:
1.
Decide which type of service, application, or game you want to provide.
2.
Find the local IP address of the computer on your network that will provide the service.
The server computer must always have the same IP address. Assign a reserved IP
address to the server computer. See
3.
Launch a web browser from a computer or wireless device that is connected to the network.
4.
Type http://routerlogin.net or www.routerlogin.com.
A login screen displays.
5.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Dual Band Wireless VDSL2 + Ethernet Gateway
Reserved LAN IP Addresses
Control Internet Access
44
on page 73.
Advertisement
Table of Contents
