Table of Contents
Advertisement
4.
Select Advanced > USB Storage > Advanced Settings.
5.
Scroll down to the Available Networks Folder section and view or adjust the following
settings:
•
Share Name. If only one device is connected, the default share name is
USB_Storage. (Some gateway models include more than one USB port.)
You can click the name or type it in the address field of your web browser. If Not
Shared is shown, someone deleted the default share, and no other share for the root
folder exists. Click the link to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on the
network folder. All – no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the gateway.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total Space and Free Space. Show the current utilization of the storage device.
6.
If you changed the settings, click the Apply button.
Your changes are saved.
Add a Network Folder on a USB Drive
You can add network folders on the USB storage device.
To add a network folder:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
Dual Band Wireless VDSL2 + Ethernet Gateway
Share a USB Drive Attached to the Gateway
59
Advertisement
Table of Contents
