Table of Contents
Advertisement
7.
Click the Add Custom Service button.
8.
In the Name field, enter a descriptive name.
9.
In the Type field, select the protocol.
If you are unsure, select TCP/UDP.
10.
In the Start Port field, enter the beginning port number.
If the application uses a single port, enter the same port number in the End Port field.
If the application uses a range of ports, enter the ending port number of the range in the
Finish Port field.
11.
Type the IP address in the Internal IP address field or select the radio button for an
attached device listed in the table.
12.
Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering screen.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or www.routerlogin.com.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5.
Leave the Port Forwarding radio button selected as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the Edit Service button.
Dual Band Wireless VDSL2 + Ethernet Gateway
Control Internet Access
46
Advertisement
Table of Contents
