Factory Default Settings - NETGEAR CG3000Dv2 User Manual

Factory Default Settings

You can return the gateway to its factory settings. On the rear panel of the gateway, press
and hold the Reset button
factory configuration settings shown in the following table.
Table 2. Factory default settings
Feature Parameter
Gateway login User login URL
User name and password
(case-sensitive)
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
Internet WAN MAC address
connection
WAN MTU size
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
for over 7 seconds. The gateway resets and returns to the
Default
http://192.168.0.1
admin/password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address.
1500
Supplemental Information
54