Factory Default Settings - NETGEAR CG3000DCR User Manual

Factory Default Settings

You can return the gateway to its factory settings. On the rear panel of the gateway, press
and hold the Factory Defaults button
returns to its factory settings. Your device returns to the factory configuration settings shown
in the following table.
Factory Default Settings
Gateway Login User login URL
User name and password (case
sensitive)
Local Network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
Internet WAN MAC address
connection
WAN MTU size
CG3000DCR Advanced Cable Modem Gateway
for over 7 seconds. The gateway resets, and
http://10.1.10.1
MSO, D0nt4g3tme
admin, highspeed
10.1.10.1
255.255.255.0
Enabled
10.1.10.10
10.1.10.199
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address
1500
Supplementary Information
40