Factory Default Settings - NETGEAR CG3300CMR User Manual

Supplemental Information
A.
This appendix provides factory default settings and technical specifications for the Wireless
Cable Gateway CG3300CMR.

Factory Default Settings

You can return the gateway to its factory settings. On the back panel of the gateway, press
and hold the Restore Factory Settings button for over 7 seconds. The gateway resets and
returns to the factory configuration settings shown in the following table.
Factory Default Settings
Gateway login
Local network
(LAN)
Firewall
Internet
connection
User login URL
User name and password
(case-sensitive)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP ending IP address
Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
WAN MAC address
WAN MTU size
http://192.168.1.1
admin/password
192.168.1.1
255.255.255.0
Enabled
192.168.1.2
192.168.1.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address
1500
79
A