Table of Contents
Advertisement
4.
Select Wireless.
5.
For the 2.4 GHz WiFi band, in the Wireless Network (2.4 GHz b/gn/n) section of the screen,
select a setting in the Mode list.
•
300-Mbps. 802.11n devices can connect at this speed. This is the default setting.
•
Up to 145 Mbps. 802.11n and 802.11g wireless devices can join the network.
•
g & b. This supports up to 54 Mbps.
6.
Click the Apply button.
Your settings are saved.
If you used WiFi to connect to the network and you changed the SSID, you are
disconnected from the network.
Change the WiFi Password or Security Level
Your router comes with preset WPA2 or WPA security. The password that you enter to
connect to your network is unique to your router and is on the router label. To protect your
network from unwanted access, do not to disable security.
To change the WPA settings:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
Dual Band Wireless VDSL2 + Ethernet Gateway
Specify Network Settings
79
Advertisement
Table of Contents
