Troubleshoot Internet Browsing - NETGEAR VEVG2610-1FXAUS User Manual

Dual band wireless vdsl2 + ethernet gateway
Table of Contents

Advertisement

b. Unplug the gateway.
c. Plug in the cable or DSL broadband modem and turn it on.
d. Wait two minutes.
e. Plug in the gateway and wait two minutes.
If your gateway is still unable to obtain an IP address from the ISP, the problem might be one
of the following:
Your Internet service provider (ISP) might require a login program.
Ask your ISP if they require PPP over Ethernet (PPPoE) or some other type of login. If
your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computer's host name.
Assign the computer host name of your ISP account as the account name in the Internet
Setup screen.
If your ISP allows only one Ethernet MAC address to connect to Internet and checks for
your computer's MAC address, do one of the following:
-
Inform your ISP that you bought a new network device and ask them to use the
gateway's MAC address.
-
Configure your gateway to clone your computer's MAC address.

Troubleshoot Internet Browsing

If your gateway can obtain an IP address, but your computer is unable to load any web pages
from the Internet, it might be for any of the following reasons:
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or
two DNS servers for your use. If you entered a DNS address during the gateway's
configuration, reboot your computer and verify the DNS address. You can configure your
computer manually with DNS addresses, as explained in your operating system
documentation.
The gateway might not be configured as the TCP/IP gateway on your computer.
If your computer obtains its information from the gateway by DHCP, reboot the computer
and verify the gateway address.
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you no
longer need to run that software after installing your gateway. If you use Internet Explorer
as your browser, you might need to select Tools > Internet Options, click the
Connections tab, and select the Never dial a connection check box. Other browsers
provide similar options.
Dual Band Wireless VDSL2 + Ethernet Gateway
Troubleshooting
116

Advertisement

Table of Contents
loading

Table of Contents