Table of Contents
Advertisement
4.
Select Advanced > Advanced Setup > USB Settings.
By default the Enable any USB Device connection to the USB port Yes radio button is
selected. This setting lets you connect and access all your USB drives.
5.
Select the No radio button.
6.
Click the Approved Devices button.
The approved and available USB devices display.
7.
In the Available USB Devices list, select the drive that you want to approve.
8.
Click the Add button.
9.
Select the Allow only approved devices check box.
10.
Click the Apply button.
Your change takes effect.
11.
To work with another USB device, first click the Safely Remove USB Device button for the
currently connected USB device. Connect the other USB device, and repeat this process.
Safely Remove a USB Drive
Before you physically disconnect a USB drive from the gateway USB port, log in to the
gateway and take the drive offline.
Dual Band Wireless VDSL2 + Ethernet Gateway
Share a USB Drive Attached to the Gateway
62
Advertisement
Table of Contents
