11.
CARBURETOR
FUEL TANK
FUEL PUMP REMOVAL
Remove the met-in box. ( Ö 12-4)
Remove the frame body cover. ( Ö 12-5)
Remove the rear carrier. ( Ö 12-5)
Disconnect the fuel pump inlet, outlet and
vacuum tubes.
Remove the two fuel pump attaching bolts
and the fuel pump.
FUEL PUMP INSTALLATION
Install the fuel pump and secure it with the
two bolts.
Connect the fuel pump inlet, outlet and
vacuum tubes.
Install the seat, met-in box and frame center
cover.
Measure the fuel pump output.
Start the engine and disconnect the fuel
outlet tube and place a clean container
under the tube to check the fuel output.
Output: 40cc/1700rpm/10 seconds.
11-13
Fuel Pump
Bolts
Fuel Tank Tube
Vacuum Tube
Outlet Tube
Container
GRAND DINK 50